13.4 A 6.3mW BLE transceiver embedded RX image-rejection filter and TX harmonic-suppression filter reusing on-chip matching network

In previous research, solutions to the requirements for BLE have been widely discussed such as using the sliding IF (SIF) architecture in the RX [1,2] and a Class-D amplifier [2] with HD2 calibration [4] in the TX to achieve lower current consumption. The SIF architecture, however, involves RF image blocking violation without exception rule or the use of additional off-chip filters. In the TX, meanwhile, the calibration incurs a weakness in terms of the offset issue. Moreover, there is no approach to achieve "zero" external components for the RF port. In this paper, a BLE transceiver, with a reconfigurable filter, embedded into an on-chip matching network without any external components, is presented.