Determination of power angle curves of synchronous machines considering cross-magnetizing saturation effect

Author

Zhou Ji

Author_Institution

Dept. of Electr. Eng., North China Electr. Power Univ., Beijing

Volume

1

fYear

2000

fDate

2000

Firstpage

228

Abstract

Power angle curves of synchronous machines including saturation and cross-magnetizing effect were calculated by finite element methods in this paper. Two calculation methods were presented. The first one is that the saturated power angle curve is determined directly by FE analysis. The second one is to calculate the saturated reactances by FE firstly and then determine the saturated power angle curve based on the saturated reactances. In the first method, the cross-magnetizing effect is included in the calculation of saturated power angle curve. In the second one, the parameters describing cross-magnetizing effect are calculated by FE analysis and then the saturated power angle curve is calculated using the saturated reactances. The validity of calculation is shown by a good agreement between measured and calculated power angle curve of a 200 MW turbine generator

Keywords

electric reactance; finite element analysis; machine theory; magnetisation; synchronous generators; turbogenerators; 200 MW; cross-magnetizing saturation effect; finite element methods; nonlinear magnetics; power angle curves; saturated power angle curve; saturated reactances; synchronous machines; turbine generator; Character generation; Finite element methods; Magnetic analysis; Magnetic field measurement; Power generation; Power measurement; Saturation magnetization; Stability; Synchronous machines; Turbines;

fLanguage

English

Publisher

ieee

Conference_Titel

Power Engineering Society Winter Meeting, 2000. IEEE

Print_ISBN

0-7803-5935-6

Type

conf

DOI

10.1109/PESW.2000.849960

Filename

849960