DocumentCode :
2195676
Title :
Modeling and simulation of power line channel
Author :
Jung, Soo-Young ; Kim, Tae-Hyun ; Lee, Myung-Un ; Kwon, Wook-Hyun
Author_Institution :
Sch. of Electr. Eng., Seoul Nat. Univ., South Korea
fYear :
2004
fDate :
6-10 June 2004
Firstpage :
793
Abstract :
The channel model of power line is presented on the network of a distribution system with power line communication. The most meaningful characteristics of this medium consider on noise, attenuation, impedance and phase shift. The channel model consists of two factors, noise and attenuation model. Each modeling approach is shown. The simulation of frequency characteristic on power line communication channel is also presented. The modulation frequency on the simulation is used from 100 kHz to 300 kHz. The effect of signal by noise and attenuation is discussed.
Keywords :
carrier transmission on power lines; distribution networks; noise; phase shifters; telecommunication channels; 100 to 300 kHz; attenuation model; distribution system; modulation frequency; noise model; phase shift; power line channel; power line communication channel; Attenuation; Background noise; Circuit noise; Frequency; Home appliances; Phase noise; Power cables; Power line communications; Power system modeling; Working environment noise;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Power Engineering Society General Meeting, 2004. IEEE
Print_ISBN :
0-7803-8465-2
Type :
conf
DOI :
10.1109/PES.2004.1372925
Filename :
1372925
Link To Document :
بازگشت