DocumentCode :
2245047
Title :
An Active-RC Complex Filter with Mixed Signal Tuning System for Low-IF Receiver
Author :
Du, Dingkun ; Li, Yongming ; Wang, ZhiHua ; Tan, Seeteck
Author_Institution :
Inst. of Microelectron., Tsinghua Univ., Beijing
fYear :
2006
fDate :
4-7 Dec. 2006
Firstpage :
1031
Lastpage :
1034
Abstract :
An active-RC complex filter synthesized from leapfrog low-pass prototype is proposed in this paper, which is less sensitive to components values variation comparing with the common used cascade-pole method. Furthermore, a mixed-signal tuning system was implemented to make the RC time constant stable, and can be turned off after the completion of tuning. The filter was implemented in 0.18mum CMOS process. It is centered at 4MHz with 2MHz of bandwidth. It has the voltage gain of about -2dB, the image rejection ratio of about 28dB, the output 1-dB compression voltage of 0.39V, the in-band integral output noise of 32muVrms, and the power consumption of 6.1mW. The filter can be used in the low-IF GPS receiver
Keywords :
CMOS integrated circuits; RC circuits; active filters; circuit tuning; low-pass filters; radio receivers; 0.18 micron; 0.39 V; 2 MHz; 4 MHz; 6.1 mW; CMOS process; RC time constant; active-RC complex filter; cascade-pole method; leapfrog low-pass filter; low-IF receiver; mixed signal tuning system; Bandwidth; CMOS process; Energy consumption; Filters; Global Positioning System; Image coding; Prototypes; Signal synthesis; Signal to noise ratio; Voltage;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Circuits and Systems, 2006. APCCAS 2006. IEEE Asia Pacific Conference on
Conference_Location :
Singapore
Print_ISBN :
1-4244-0387-1
Type :
conf
DOI :
10.1109/APCCAS.2006.342264
Filename :
4145572
Link To Document :
بازگشت