Design Consideration for 10 Gbps Signal Transmission Channel in Copper Backplane System

Author

Cao, Yuesheng ; Li, Jinwen ; Hu, Jun ; Zheng, Mingling ; Li, Baofeng

Author_Institution

Sch. of Comput. Sci., Nat. Univ. of Defense Technol., Changsha, China

fYear

2011

fDate

20-23 June 2011

Firstpage

215

Lastpage

218

Abstract

This paper describes techniques and key parameters for designing long-distance path of 10 Gbps signal transmission in copper backplane system. First, two connecting modes for copper backplane have been presented. And then, some materials and connectors used in high speed PCB are clarified. For high-speed layout, various techniques such as routing high speed signals with angle mode to mitigate the fiber-weave effect and using back-drilling to reduce stub-effect are discussed finally.

Keywords

copper; electric connectors; high-speed integrated circuits; network routing; printed circuit layout; angle mode; back-drilling; bit rate 10 Gbit/s; connectors; copper backplane system; design consideration; fiber-weave effect; high speed PCB; high-speed layout; long-distance path; routing high speed signals; signal transmission channel; stub-effect; Backplanes; Connectors; Copper; Joining processes; Layout; Silicon; PCB material; PTH; SI; back-drilling; backplane; connector; fiber-weave; high-speed PCB; stub-effect; transmission; via;

fLanguage

English

Publisher

ieee

Conference_Titel

Computational Science and Its Applications (ICCSA), 2011 International Conference on

Conference_Location

Santander

Print_ISBN

978-1-4577-0142-9

Type

conf

DOI

10.1109/ICCSA.2011.37

Filename

5959622