Title :
Preparation of high surface area activated carbon by chemical activation using waste PET
Author :
Chen, Jinyang ; Liu, Feng ; Ruan, Ruyi ; Li, Zhi
Author_Institution :
Sch. of Environ. & Chem. Eng., Shanghai Univ., Shanghai, China
Abstract :
Poly (ethylene terephthalate) (PET), the most important specie of thermoplastic polyester, have been widely used in humans´ life. Waste PET is not easy to degradation and become a burden for the environment; therefore, its recycling is very important. High surface area activated carbon is prepared by chemical activation using waste PET. The experiment condition are as follows: carbonization temperature 500°C, 30 min, ratio of alkaline/PET 4:1, activation temperature 800°C, 60 min. Surface area of the product can reach 1527~1608m2/g. With KOH and K2CO3 as activators, activated carbon with a large number of micro and meso pore is obtained.
Keywords :
activated carbon; industrial waste; polymer blends; potassium compounds; recycling; K2CO3; KOH; activation temperature; carbonization temperature; chemical activation; high surface area activated carbon; mesopore; micropore; polyethylene terephthalate; recycling; temperature 500 degC; temperature 800 degC; thermoplastic polyester; time 30 min; time 60 min; waste PET; Biological system modeling; Carbon; Chemicals; Fuels; Mesoporous materials; Positron emission tomography; X-ray scattering; activated carbon; chemical activation; preparation; waste PET;
Conference_Titel :
Remote Sensing, Environment and Transportation Engineering (RSETE), 2011 International Conference on
Conference_Location :
Nanjing
Print_ISBN :
978-1-4244-9172-8
DOI :
10.1109/RSETE.2011.5965974
