DocumentCode
2552776
Title
Wide band bunny-ear radiating element
Author
Lee, J.J. ; Livingston, S.
Author_Institution
Hughes Aircraft Co., Fullerton, CA, USA
fYear
1993
fDate
June 28 1993-July 2 1993
Firstpage
1604
Abstract
A low-cost wideband radiating element for EW (electronic warfare) and radar array antenna applications is reported. This printed end-fire bunny-ear element is fed by a balanced slot line, and it can operate over 0.5 to 18 GHz with very low loss in an isolated environment. The input transition, the feed line, and the launching section of this element are essentially TEM (transverse electromagnetic) structures. The element was scaled and used in an L-band array with 50% instantaneous bandwidth.<>
Keywords
antenna feeds; antenna radiation patterns; electronic warfare; linear antenna arrays; microstrip antenna arrays; radar antennas; slot antenna arrays; slot lines; transient response; 0.5 to 18 GHz; L-band array; SHF; TEM structures; UHF; balanced slot line; electronic warfare; feed line; input transition; launching section; low-cost wideband radiating element; printed end-fire bunny-ear element; radar array antenna; Antenna arrays; Bandwidth; Broadband antennas; Electromagnetic launching; Electronic warfare; Feeds; L-band; Radar antennas; Radar applications; Wideband;
fLanguage
English
Publisher
ieee
Conference_Titel
Antennas and Propagation Society International Symposium, 1993. AP-S. Digest
Conference_Location
Ann Arbor, MI, USA
Print_ISBN
0-7803-1246-5
Type
conf
DOI
10.1109/APS.1993.385504
Filename
385504
Link To Document