DocumentCode
2653720
Title
Performance of the LANSCE H- source and low energy beam transport at higher peak current
Author
Pillai, C. ; Stevens, R.R. ; Fitzgerald, D.H. ; Garnett, R.W. ; Ingalls, W.B. ; Merrill, F.E. ; Rybarcyk, L.J. ; Sander, O.R.
Author_Institution
LANSCE Div., Los Alamos Nat. Lab., NM, USA
Volume
3
fYear
1997
fDate
12-16 May 1997
Firstpage
2743
Abstract
The Los Alamos Neutron Science Center (LANSCE) 800 MeV accelerator facility uses a multicusp-field, surface production ion source to produce a H- beam for delivery to the Proton Storage Ring (PSR) and to the Weapon Neutron Research (WNR) areas. The average current delivered to the short-pulse spallation target is nominally 70 μA. One goal of the present PSR upgrade project is to increase the average beam current to 200 μA. This will be accomplished by a combination of increased repetition rate (from 20 Hz to 30 Hz), upgraded PSR bunchers, and a brighter H- ion source that is being designed to produce higher peak current with lower beam emittance. The present ion source and LEBT system were studied to investigate beam quality and performance at higher peak currents. Beam parameters from the ion source and in the LEBT at higher currents are compared to those for standard operating conditions
Keywords
beam handling techniques; ion sources; particle beam diagnostics; 800 MeV; H; H- source; LANSCE; beam current; beam emittance; beam quality; low energy beam transpor; multicusp-field; peak current; spallation target; surface production ion source; Acceleration; Apertures; Electrodes; Electron beams; Electron emission; Ion beams; Ion sources; Neutrons; Particle beams; Solenoids;
fLanguage
English
Publisher
ieee
Conference_Titel
Particle Accelerator Conference, 1997. Proceedings of the 1997
Conference_Location
Vancouver, BC
Print_ISBN
0-7803-4376-X
Type
conf
DOI
10.1109/PAC.1997.752751
Filename
752751
Link To Document