Impact of slot geometry and rotor position on AC armature losses of interior PM synchronous machines

Author

Hahlbeck, S. ; Gerling, D.

Author_Institution

Dept. of Adv. Eng., Daimler AG, Stuttgart, Germany

fYear

2010

fDate

6-8 Sept. 2010

Firstpage

1

Lastpage

3

Abstract

This paper examines the influence of slot geometry in means of the impact of pole shoes at the stator teeth on ac armature losses in concentrated windings of Interior Permanent Magnet (IPM) synchronous machines. It is shown that the rotor position as well as the stator teeth geometry affects the ac armature losses in the concentrated windings. Here a configuration without a pole shoe tends to have higher losses due to the stronger effect of the rotor stray flux onto the stator windings.

Keywords

permanent magnet machines; rotors; stators; synchronous machines; AC armature losses; PM synchronous machines; concentrated windings; interior permanent magnet synchronous machines; pole shoes impact; rotor position; rotor stray flux; slot geometry; stator teeth; stator teeth geometry; stator windings; Coils; Footwear; Rotors; Stator windings; Windings; Wire; AC losses; AC machines; Armature losses concentrated winding; Permanent Magnet machines; Proximity losses; slot leakage flux; stator pole shoe;

fLanguage

English

Publisher

ieee

Conference_Titel

Electrical Machines (ICEM), 2010 XIX International Conference on

Conference_Location

Rome

Print_ISBN

978-1-4244-4174-7

Electronic_ISBN

978-1-4244-4175-4

Type

conf

DOI

10.1109/ICELMACH.2010.5608240

Filename

5608240