• DocumentCode
    2653863
  • Title

    An integrated design of SM2C core motor for vehicular applications

  • Author

    Reinap, Avo ; Högmark, Conny ; Alaküla, Mats ; Cedell, Tord ; Andersson, Mats

  • Author_Institution
    Dept. of Ind. Electr. Eng. & Autom., Lund Univ., Lund, Sweden
  • fYear
    2010
  • fDate
    6-8 Sept. 2010
  • Firstpage
    1
  • Lastpage
    6
  • Abstract
    This paper focuses on the design and the evaluation of a three-phase permanent magnet synchronous machine (PMSM) with a stator core made of Soft Magnetic Mouldable Composite - SM2C. A radial flux PM machine with modular winding is designed for a high-speed low-voltage automotive application. Manufacturability and a high winding fill factor are vital for a low permeability stator core in order to gain a good performance and a low cost in combination with moulding technique. Two stators are built and verified with good results.
  • Keywords
    machine windings; permanent magnet machines; soft magnetic materials; synchronous machines; SM2C core motor; high-speed low-voltage automotive application; modular winding; radial flux PM machine; soft magnetic mouldable composite; stator core; three-phase permanent magnet synchronous machine; vehicular applications; Coils; Magnetic cores; Stator cores; Stator windings; Torque; Windings; machine windings; soft magnetic materials;
  • fLanguage
    English
  • Publisher
    ieee
  • Conference_Titel
    Electrical Machines (ICEM), 2010 XIX International Conference on
  • Conference_Location
    Rome
  • Print_ISBN
    978-1-4244-4174-7
  • Electronic_ISBN
    978-1-4244-4175-4
  • Type

    conf

  • DOI
    10.1109/ICELMACH.2010.5608244
  • Filename
    5608244
    • Link To Document
    https://search.isc.ac/dl/search/defaultta.aspx?DTC=49&DC=2653863