An adaptive knee joint exoskeleton based on biological geometries

This paper presents a dynamic model of a knee joint interacting with a two-link exoskeleton for investigating the effects of different exoskeleton designs on internal joint forces. The closed kinematic chain of the leg and exoskeleton has a significant effect on the joint forces in the knee. A bio-joint model is used to capture this effect by relaxing a commonly made assumption that approximates a knee joint as a perfect engineering pin-joint in exoskeleton design. Based on the knowledge of a knee-joint kinematics, an adaptive knee-joint exoskeleton has been designed by incorporating different kinematic components (such as a pin, slider and cam profile). This design potentially eliminates the negative effects associated with the closed leg/exoskeleton kinematic chain on a human knee. An investigation in the flexion motion of an artificial human knee joint is presented to compare performances of five exoskeleton designs against the case with no exoskeletons. Analytical results that estimate internal forces using the dynamic model (based on the properties of a knee joint) agree well with the experiments. These studies lead to an adaptive mechanism with a slider/cam as an alternative to pin joints for the exoskeleton, and illustrate the application of the model for designing an adaptive mechanism that minimizes internal joint forces due to a human-exoskeleton interaction.