Title :
Study of digital interface protocol based on Ethernet for NC system
Author :
Ren, Qingrong ; Chen, Jihong ; Tang, Xiaoqi ; Zhou, Xiangdong
Author_Institution :
Sch. of Mech. Sci. & Eng., Huazhong Univ. of Sci. & Technol., Wuhan
Abstract :
Ethernet communication isn´t used directly in numerical control (NC) system, since its non-deterministic time delays and non-synchronous communication. In this paper, the system architecture of digital interface and the communicating- protocol of digital interface in NC system based on the Ethernet technology are made. The protocol was tested by experiment in feasibility. The results show that it meets the communication requirements of real-time, synchronization and reliability. The interface was used in the experimental platform of NC system developed independently based on Ethernet technology.
Keywords :
control engineering computing; local area networks; network interfaces; numerical control; protocols; telecommunication network reliability; Ethernet communication; communicating protocol; digital interface protocol; nondeterministic time delays; nonsynchronous communication; numerical control system; reliability; synchronization; Communication system control; Computer numerical control; Delay effects; Ethernet networks; Hardware; Internet; Media Access Protocol; Network topology; Power system reliability; TCPIP; Digital communications protocol; Ethernet Numerical Interface; NC system;
Conference_Titel :
Information and Automation, 2008. ICIA 2008. International Conference on
Conference_Location :
Changsha
Print_ISBN :
978-1-4244-2183-1
Electronic_ISBN :
978-1-4244-2184-8
DOI :
10.1109/ICINFA.2008.4608289
