Title :
A 2.4~6GHz CMOS Broadband High-Gain Differential LNA for UWB and WLAN Receiver
Author :
Chang, Chung-Ping ; Yen, Cheng-Chi ; Chuang, Huey-Ru
Author_Institution :
Dept. of Electr. Eng., Nat. Cheng Kung Univ., Tainan
Abstract :
A 2.4-6 GHz broadband CMOS differential LNA for WLAN and UWB receiver is presented. The LNA is fabricated with the 0.18 mum 1P6M standard CMOS process. Measurement of the chip is performed on a FR-4 PCB test fixture. In the UWB low-band (3 to 5.15GHz), the broadband LNA exhibit a gain of 17.5-18.2 dB, noise figure of 3.4-5dB, input/output return loss better than 10 dB, and input P1dB of -17 dBm, respectively. In the band from 2.4 to 3GHz (covering an 802.11b/g band), the LNA exhibit a gain of 17.5-18dB and noise figure less than 3.5dB. From 5.2 to 6GHz, the noise figure of the LNA becomes higher than 5 dB. The gain also decreases to about 15 dB. The DC supply is 1.8V
Keywords :
CMOS integrated circuits; IEEE standards; UHF integrated circuits; differential amplifiers; low noise amplifiers; microwave integrated circuits; microwave receivers; ultra wideband communication; wideband amplifiers; wireless LAN; 0.18 micron; 1.8 V; 17.5 to 18.2 dB; 1P6M standard CMOS process; 2.4 to 6 GHz; 802.11b/g band; CMOS broadband LNA; FR-4 PCB test fixture; UWB receiver; WLAN receiver; high-gain differential LNA; low noise amplifier; Bandwidth; Broadband amplifiers; CMOS process; CMOS technology; Circuit noise; Circuit topology; Gain; Impedance; Noise figure; Wireless LAN;
Conference_Titel :
Asian Solid-State Circuits Conference, 2005
Conference_Location :
Hsinchu
Print_ISBN :
0-7803-9162-4
Electronic_ISBN :
0-7803-9163-2
DOI :
10.1109/ASSCC.2005.251767