Joint Mitigation of Nonlinear RF and Baseband Distortions in Wideband Direct-Conversion Receivers

Software-defined radio technology is experiencing more and more attention in modern communication and radar systems. The main practical challenge in deploying such technology is related to achieving sufficient linearity and spurious-free dynamic range in the RF front-end, especially in low-cost mass-product devices. This paper focuses on the analysis and digital mitigation of nonlinear distortion in software-define radio devices, building on wideband multicarrier/multiradio direct-conversion receiver principle where a wide collection of radio frequencies is in-phase/quadrature down-converted as a whole. A complete behavioral model for the total nonlinear distortion of the whole receiver chain is first derived, taking into account the third-order nonlinear distortion effects in all individual components, namely, RF low-noise amplifier, in-phase/quadrature mixer, and baseband in-phase/quadrature amplifiers. Stemming from this modeling, an adaptive digital feed-forward linearization structure is then developed to efficiently mitigate the joint nonlinear distortion of the whole receiver. The effectiveness of this approach is verified through extensive simulations and actual RF system measurements with a commercially available software-defined radio platform, which clearly outperforms the existing state-of-the-art methods that do not jointly consider RF and baseband nonlinearities.