DocumentCode
2788397
Title
SNS extraction kicker power supply prototype test
Author
Mi, J.-L. ; Sandberg, J. ; Sanders, R. ; Soukas, A. ; Zhang, W.
Author_Institution
Dept. of Collider-Accel., Brookhaven Nat. Lab., Upton, NY, USA
fYear
2000
fDate
26-29 June 2000
Firstpage
171
Lastpage
174
Abstract
The SNS (Spallation Neutron Source) accumulator ring extraction system consists of a fast kicker and a Lambertson septum magnet. The proposed design will use 14 kicker magnets powered by an extraction kicker power supply system. They will eject the high power beam from the SNS accumulator ring into RTBT (ring to target beam tunnel) through a Lambertson septum magnet. This paper describes some test results of the SNS extraction kicker power supply prototype. The high repetition rate of 60 pulse per second operation is the challenging part of the design. In the prototype testing, a 3 kA damp current of 700 ns pulse-width, 200 ns rise time and 60 Hz repetition rate at 32 kV PFN operation voltage has been demonstrated. An extraction kicker power supply system design diagram is depicted.
Keywords
accelerator RF systems; accelerator magnets; neutron sources; pulsed power supplies; storage rings; 200 ns; 3 kA; 32 kV; 60 Hz; 700 ns; Lambertson septum magnet; PFN operation voltage; Spallation Neutron Source; accumulator ring extraction system; extraction kicker power supply; fast kicker; high power beam ejection; high repetition rate; kicker magnets; pulse forming network; ring to target beam tunnel; Ferrites; Particle beams; Power supplies; Prototypes; Pulse circuits; Pulse modulation; Pulsed power supplies; Resistors; Testing; Voltage;
fLanguage
English
Publisher
ieee
Conference_Titel
Power Modulator Symposium, 2000. Conference Record of the 2000 Twenty-Fourth International
Conference_Location
Norfolk, VA, USA
ISSN
1076-8467
Print_ISBN
0-7803-5826-0
Type
conf
DOI
10.1109/MODSYM.2000.896192
Filename
896192
Link To Document