Title :
Notice of Retraction
The Grid Division Ways Fluenced on the Gear-Tooth Root Stress in FEA
Author :
Xia Chen ; Qingming Chang
Author_Institution :
Key Lab. for Ferrous Metall. & Resources Utilization of Minist. of Educ., Wuhan Univ. of Sci. & Technol., Wuhan, China
Abstract :
Notice of Retraction
After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE´s Publication Principles.
We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper.
The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org.
Grid division in finite element is very important to carry out simulating analysis, it directly affects the following calculation accuracy for analysis result .In view of this, and this article uses four kinds of different ways of grid division to mesh gear-tooth root spot during the course of finite element analysis of gear meshing. Through drawing up and comparing the von mise tendency chart of compressive and tensile spot of gear-tooth root on different ways, it still denotes the influence which different ways of grid division have on the analysis result of gear-tooth root stress. This has the practical significance and value for finite element analysis of gear-tooth root stress.
Keywords :
charts; computational geometry; drawing (mechanical); gears; mechanical engineering computing; mesh generation; FEA; drawing; finite element analysis; gear meshing; gear-tooth root stress; grid division ways; von mise tendency chart; Analytical models; Automation; Finite element methods; Fitting; Gears; Mechanical systems; Stress;
Conference_Titel :
Circuits, Communications and System (PACCS), 2011 Third Pacific-Asia Conference on
Conference_Location :
Wuhan
Print_ISBN :
978-1-4577-0855-8
DOI :
10.1109/PACCS.2011.5990226
