Electrification of polymer surface caused by sliding ultrapure water

It has been thought that the conductivity of pure water is high enough to neglect the streaming electrification. However, with the advancement of semiconductor industries, even ultrapure water appeared to cause electrification problems at the washing and the rinsing processes of semiconductor wafers. The investigation on the electrification phenomenon of polymer (PTFE) surface with ultrapure water is described in this article. Water droplets are always charged positively after sliding on the PTFE surface, and the surface potential on PTFE is almost negative and varied along the path of droplets becoming positive downstream. As the conductivity of water becomes closer to that of ideal water, the amount of droplet charge increases drastically. This electrification phenomenon is also enhanced by decreasing the thickness of the PTFE plate. It suggests that the Coulomb force between the charge on the PTFE surface and the minor image charge is an important factor. The authors have proposed a model which is based on the electric double layer similar to conventional streaming electrification for insulating liquid, assuming that the charged droplet leaves the excess positive charge on the polymer surface