Survey and analysis of 0.18 urn CMOS integrated antennas on 5.8 GHz for RFD

Author

Suslov, Mikhail ; Timoshenko, Aleksandr ; Lomovskaya, Ksenia

Author_Institution

TCS Dept., Univ. of Electron. Technol., Moscow, Russia

fYear

2012

fDate

25-27 Oct. 2012

Firstpage

1

Lastpage

6

Abstract

The issue of major interest during RFID systems development is reducing the size and price of RFID tag. This article is dedicated to design and implementation of 0.18 um CMOS integrated antenna for RFID system to include price of antenna implementation in price of RFID IC. Decreasing techniques of influence of layout configuration and methods of decreasing of metal stress states inside chip on antenna parameters are discussed. Functional synchronization was used in the generator to provide 5725 ÷ 5875 MHz differential output signal with 1.8 V supply voltage. Test antenna was implemented within test die, size 5×5 mm², 0.18 um CMOS technology. A possibility of further decreasing of antenna size up to 1 mm2 was analyzed. Implemented antenna has gain of -25 dB@5.8 GHz and could be used up to 9 GHz without significant loss in efficiency.

Keywords

CMOS integrated circuits; microwave antennas; radiofrequency identification; radiofrequency integrated circuits; CMOS integrated antennas; RFID IC; RFID systems development; RFID tag; antenna implementation; antenna parameters; frequency 5.8 GHz; functional synchronization; layout configuration; metal stress states; size 0.18 mum; test antenna; voltage 1.8 V; Telecommunications; RFID; antenna parameters; integrated antennas; interchip communications; metallization; microstrip antennas; stress states;

fLanguage

English

Publisher

ieee

Conference_Titel

Telecommunications (BIHTEL), 2012 IX International Symposium on

Conference_Location

Sarajevo

Print_ISBN

978-1-4673-4875-1

Electronic_ISBN

978-1-4673-4874-4

Type

conf

DOI

10.1109/BIHTEL.2012.6412069

Filename

6412069