DocumentCode :
3003951
Title :
A controllable phase coherent modulated RF signal for use with microwave network analyzer measurements
Author :
Vael, P. ; Rolain, Y.
Author_Institution :
Vrije Univ., Brussels, Belgium
Volume :
4
fYear :
1999
fDate :
13-19 June 1999
Firstpage :
1655
Abstract :
A method is proposed to build a phase coherent modulated RF signal, that can be used as excitation signal for microwave network analyzer measurements. A software feedback technique is used to correct the amplitude and phase distortions introduced in the signal path to the input port of the device under test (DUT). This technique allows one to create a modulated excitation signal with a known spectrum (amplitude and phase) of the modulation signal. Such a "controlled modulation" signal is required to test microwave components under pulsed or modulated (non-continuous wave excitation) test conditions.
Keywords :
microwave measurement; network analysers; phase modulation; amplitude distortions; device under test; excitation signal; known spectrum; microwave component test; microwave network analyzer measurements; modulated excitation signal; modulation signal; phase coherent modulated RF signal; phase distortions; signal path; software feedback technique; Amplitude modulation; Distortion measurement; Microwave devices; Microwave measurements; Microwave theory and techniques; Phase modulation; Pulse modulation; RF signals; Signal analysis; Testing;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Microwave Symposium Digest, 1999 IEEE MTT-S International
Conference_Location :
Anaheim, CA, USA
Print_ISBN :
0-7803-5135-5
Type :
conf
DOI :
10.1109/MWSYM.1999.780288
Filename :
780288
Link To Document :
بازگشت