Measurement of space charge distribution in XLPE cable using PEA system with flat electrode

Author

Muronaka, Tsuguya ; Tanaka, Yasuhiro ; Takada, Tatsuo ; Maruyama, Satoru ; Mutou, Hideji

Author_Institution

Musashi Inst. of Technol., Tokyo, Japan

Volume

1

fYear

1996

fDate

20-23 Oct 1996

Firstpage

266

Abstract

The Pulsed Electro-Acoustic (PEA) method has been used for the measurement of space charge distribution in solid dielectric films or cable shape samples. However, the PEA system for cable shape samples had a curved surface electrode, which had the same radius curve to the outer radius of the sample cable. Therefore, if we measure cables of various radii, it is necessary to make the curved surface electrode which fits with each outer radius of various cables. In the newly developed system, we succeed in reducing the noise level and increasing the sensitivity. This improvement makes it possible to use the flat shape electrode. Using this new system, we can apply the PEA method to any size of cable. Using this system, space charge distribution in cross-linked polyethylene (XLPE) cables with various radii were measured. In this report, the examples of measurement results and comparison between the ordinary and improved system are presented

Keywords

XLPE insulation; dielectric thin films; electrodes; power cable insulation; space charge; PEA system; XLPE cable; cable shape samples; curved surface electrode; flat electrode; pulsed electroacoustic method; sensitivity; solid dielectric films; space charge distribution; Charge measurement; Current measurement; Dielectric measurements; Electrodes; Power cables; Pulse measurements; Pulse shaping methods; Pulsed electroacoustic methods; Shape measurement; Space charge;

fLanguage

English

Publisher

ieee

Conference_Titel

Electrical Insulation and Dielectric Phenomena, 1996., IEEE 1996 Annual Report of the Conference on

Conference_Location

Millbrae, CA

Print_ISBN

0-7803-3580-5

Type

conf

DOI

10.1109/CEIDP.1996.564678

Filename

564678