A rapid three-dimensional High Intensity Focused Ultrasound beam plotting

Author

Ho, Cheng-Shiao ; Sullivan, Joseph ; Vaezy, Shahram

Author_Institution

Department of Bioengineering, University of Washington, Seattle, 98105, USA

fYear

2008

fDate

20-25 Aug. 2008

Firstpage

2534

Lastpage

2537

Abstract

The goal of this study was to develop a rapid three-dimensional High Intensity Focused Ultrasound (HIFU) beam plotting system for visualizing the acoustic energy distribution, achieved using a three-dimensional positioning system and data acquisition hardware. Beam plots of a 1.1MHz HIFU transducer were performed to evaluate the capability of the proposed system. A three-dimensional beam plotting was completed in only about 30 minutes and covered a predetermined volume of 5mm × 20mm × 5mm with a spatial resolution of 0.2mm × 0.001mm × 0.2mm. The FWHM (Full Width at Half Maximum) dimensions of the ultrasound field on axial and lateral directions were measured at 12.51mm and 1.4mm respectively. The proposed system can not only perform 2-dimensional beam plots but also can aid in the visualization of a three-dimensional ultrasound beam pattern volume within a relatively short scanning time.

Keywords

Acoustic beams; Acoustic transducers; Data acquisition; Data visualization; Hardware; Performance evaluation; Spatial resolution; Ultrasonic imaging; Ultrasonic transducers; Ultrasonic variables measurement; Acoustics; Equipment Design; Humans; Imaging, Three-Dimensional; Oscillometry; Reproducibility of Results; Temperature; Therapy, Computer-Assisted; Time Factors; Transducers; Ultrasonic Therapy; Ultrasonics; Ultrasonography; Ultrasonography, Doppler;

fLanguage

English

Publisher

ieee

Conference_Titel

Engineering in Medicine and Biology Society, 2008. EMBS 2008. 30th Annual International Conference of the IEEE

Conference_Location

Vancouver, BC

ISSN

1557-170X

Print_ISBN

978-1-4244-1814-5

Electronic_ISBN

1557-170X

Type

conf

DOI

10.1109/IEMBS.2008.4649716

Filename

4649716