• DocumentCode
    3081
  • Title

    3-D Command State-Based Modifiable Bipedal Walking on Uneven Terrain

  • Author

    Young-Dae Hong ; Jong-Hwan Kim

  • Author_Institution
    Dept. of Electr. Eng., Korea Adv. Inst. of Sci. & Technol. (KAIST), Daejeon, South Korea
  • Volume
    18
  • Issue
    2
  • fYear
    2013
  • fDate
    Apr-13
  • Firstpage
    657
  • Lastpage
    663
  • Abstract
    Bipedal robots in previous research work were unable to independently modify the elements of a walking pattern on uneven terrain without any extra footstep for adjusting the center of mass (COM) motion. To solve this problem, this paper extends the modifiable walking pattern generator (MWPG). The MWPG can independently modify the elements of the walking pattern without any extra footstep on flat terrain only. The extended MWPG can be applied on uneven terrain. In the extended MWPG, a 3-D command state is defined to generate the walking pattern on uneven terrain. Instead of using the constant COM height, the vertical COM trajectory is generated to satisfy the foot height of the swing leg. Also, an additional trajectory, generated by the cubic spline interpolation, is supplied to the vertical foot trajectory of the MWPG. The proposed MWPG is implemented on the small-sized bipedal robot, HanSaRam-IX (HSR-IX) and the effectiveness of the proposed MWPG is demonstrated through the experiment.
  • Keywords
    interpolation; legged locomotion; motion control; splines (mathematics); 3-D command state-based modifiable bipedal walking; HSR-IX; HanSaRam-IX; bipedal robot; center of mass motion; constant COM height; cubic spline interpolation; extended MWPG; flat terrain; modifiable walking pattern generator; swing leg; uneven terrain; vertical COM trajectory; Equations; Foot; Legged locomotion; Mathematical model; Robot sensing systems; Trajectory; 3-D command state (CS); 3-D linear inverted pendulum model (LIPM); Bipedal robot; modifiable walking pattern generator (MWPG); uneven terrain locomotion;
  • fLanguage
    English
  • Journal_Title
    Mechatronics, IEEE/ASME Transactions on
  • Publisher
    ieee
  • ISSN
    1083-4435
  • Type

    jour

  • DOI
    10.1109/TMECH.2012.2182777
  • Filename
    6140577