DocumentCode :
3110654
Title :
The effects of high-power LED inner structure on the radiation patterns
Author :
Chang, Jin-Kai ; Hsu, Yi-Cheng
Author_Institution :
Dept. of Biomechatronics Eng., Nat. Pingtung Univ. of Sci. & Technol., Pingtung, Taiwan
fYear :
2009
fDate :
13-17 July 2009
Firstpage :
1
Lastpage :
2
Abstract :
This research uses optical simulation software TracePro to analyze the effects of inner lens structure on the radiation patterns. There are three inner lens geometry parameter structure: Radius of curvature(at corner)(r), Width (w) and Height (h). This research probes into the effects of radiation pattern by changing the parameters of the radiation pattern changes with inner structure. The effect of inner structure on the radiation pattern is performed by changing three geometry parameters. The results show that the geometry parameters are different and they will be impacted by the distribution of radiation pattern.
Keywords :
lenses; light emitting diodes; optical computing; curvature radius; high-power LED inner structure; inner lens structure; optical simulation software TracePro; radiation patterns; Analytical models; Geometrical optics; Lenses; Light emitting diodes; Optical design; Optical materials; Optical refraction; Optical variables control; Pattern analysis; Silicon;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
OptoElectronics and Communications Conference, 2009. OECC 2009. 14th
Conference_Location :
Hong Kong
Print_ISBN :
978-1-4244-4102-0
Electronic_ISBN :
978-1-4244-4103-7
Type :
conf
DOI :
10.1109/OECC.2009.5214262
Filename :
5214262
Link To Document :
بازگشت