SAW device implementation of a new weighted stepped chirp code signal for direct sequence spread spectrum communications systems

This paper introduces a new weighted stepped chirp code signal for direct sequence spread spectrum (DS/SS) communications systems. This code signal uses the truncated cosine series functions as the chip functions. This code signal is the result of discretizing a continuous wave (CW) chirp which results in enhanced performance versus a pseudo noise (PN) code and equivalent performance and easier implementation than a CW chirp. This code signal will be shown to have improved compression ratio (CR) and peak sidelobe level (PSL) versus a PN code with identical code length and chip length. It also will be shown to have a similar CR and PSL compared to a CW chirp with identical pulse length and frequency deviation. The code signal is implemented on surface acoustic wave (SAW) devices which will be used as the code generator at the transmitter and the correlator at the receiver. Experimental data is presented and compared to the predicted results