Wire driven robot hand

Author

Takahashi, Yoshihiko ; Tomatani, Yukio ; Matsui, Ymuaki ; Honda, Yasushi ; Miura, Tomoaki

Author_Institution

Dept. of Mech. Syst. Eng., Kanagawa Inst. of Technol., Japan

Volume

3

fYear

1997

fDate

9-14 Nov 1997

Firstpage

1293

Abstract

The basic concept of a wire driven robot hand is proposed. A hand with five fingers and three links is actuated by wires inserted in the fingers. The arm is actuated two dimensionally using a wire and pulley drive mechanism. The wrist is suspended, and actuated by wires. It was confirmed that vibration characteristics of the arm drive system changed depending on wrist position. The change in vibration characteristics was compensated by gain scheduling control in which the control gain was adjusted to wrist position. Observer based optimal control was utilized to reduce the arm vibration

Keywords

compensation; manipulators; observers; optimal control; vibration control; arm vibration reduction; gain scheduling control; observer based optimal control; two dimensional actuation; vibration characteristics; wire and pulley drive mechanism; wire driven robot hand; wrist position; Circuits; Costs; Fingers; Optimal control; Orbital robotics; Pulleys; Robots; Vibration control; Wire; Wrist;

fLanguage

English

Publisher

ieee

Conference_Titel

Industrial Electronics, Control and Instrumentation, 1997. IECON 97. 23rd International Conference on

Conference_Location

New Orleans, LA

Print_ISBN

0-7803-3932-0

Type

conf

DOI

10.1109/IECON.1997.668499

Filename

668499