DocumentCode
326026
Title
A digital frequency modulator circuit for a dual-mode cellular telephone
Author
Lahti, Jukka ; Niemisto, Matti
Author_Institution
Dept. of Electr. Eng. & Infotech Oulu, Oulu Univ., Finland
Volume
4
fYear
1998
fDate
31 May-3 Jun 1998
Firstpage
405
Abstract
The aim in the design of the circuit has been to find out the advantages in terms of power consumption that can be obtained with a hardware realization of the modulator as compared to a software solution based on a commercial DSP chip. The results show that the power consumption can be reduced significantly with moderate silicon area
Keywords
application specific integrated circuits; cellular radio; frequency modulation; modulators; IC area; digital frequency modulator circuit; dual-mode cellular telephone; hardware realization; power consumption; Circuit synthesis; Clocks; Digital modulation; Digital signal processing; Digital signal processing chips; Energy consumption; Frequency modulation; Hardware; Read only memory; Telephony;
fLanguage
English
Publisher
ieee
Conference_Titel
Circuits and Systems, 1998. ISCAS '98. Proceedings of the 1998 IEEE International Symposium on
Conference_Location
Monterey, CA
Print_ISBN
0-7803-4455-3
Type
conf
DOI
10.1109/ISCAS.1998.698889
Filename
698889
Link To Document