• DocumentCode
    3296602
  • Title

    Cooling Rate Determination for CuPb13Sn10Zn2Ni2 Bronze Type in Moulds of Different Heat Conduction

  • Author

    Korchmit, A.V. ; Ukolov, I.V.

  • Author_Institution
    Tomsk Polytech. Univ., Tomsk
  • fYear
    2005
  • fDate
    21-27 March 2005
  • Firstpage
    129
  • Lastpage
    131
  • Abstract
    The cooling rate of CuPb13Sn10Zn2Ni2 bronze has been detected in moulds of different heat conductivity: metal (steel), shell moulds and chromo- alumina phosphate moulds. It is supposed that the cooling rate in chromo-alumina phosphate moulds comes to that one of sand-and-loam moulds. The pouring temperature was 1,050degC and 1,220degC.
  • Keywords
    cooling; copper alloys; heat conduction; lead alloys; materials preparation; moulding; nickel alloys; tin alloys; zinc alloys; CuPb13Sn10Zn2Ni2; casting conditions; chemical composition; compound bronzes; compressor; cooling rate determination; ethylene compression; heat conduction; metal materials; quinary tin bronze type; tin-lead bronze family; Cooling; Friction; Furnaces; Immune system; Surface resistance; Surface treatment; Temperature; Testing; Tin; Ultrasonic imaging;
  • fLanguage
    English
  • Publisher
    ieee
  • Conference_Titel
    Modern Technique and Technologies, 2005. MTT 2005. 11th International Scientific and Practical Conference of Students, Post-graduates and Young Scientists
  • Conference_Location
    Tomsk
  • Print_ISBN
    978-0-7803-8877-2
  • Electronic_ISBN
    978-0-7803-8878-9
  • Type

    conf

  • DOI
    10.1109/SPCMTT.2005.4493222
  • Filename
    4493222
    • Link To Document
    https://search.isc.ac/dl/search/defaultta.aspx?DTC=49&DC=3296602