DocumentCode
334198
Title
Design and fabrication of a traveling-wave muffin-tin accelerating structure at 90 GHz
Author
Chou, P.J. ; Bowden, G.B. ; Copeland, M.R. ; Henke, H. ; Menegat, A. ; Siemann, R.H.
Author_Institution
Linear Accel. Center, Stanford Univ., CA, USA
Volume
1
fYear
1997
fDate
12-16 May 1997
Firstpage
464
Abstract
A prototype of a muffin-tin accelerating structure operating at 32 times the SLAG frequency (2.856 GHz) was built for research in high gradient acceleration. A traveling-wave design with single input and output feeds was chosen for the prototype which was fabricated by wire electrodischarge machining. Features of the mechanical design for the prototype are described. Design improvements are presented including considerations of cooling and vacuum
Keywords
accelerator cavities; 90 Hz; high gradient acceleration; traveling-wave design; traveling-wave muffin-tin accelerating structure; wire electrodischarge machining; Acceleration; Cooling; Electromagnetic waveguides; Fabrication; Iris; Machining; Prototypes; Radio frequency; Testing; Wire;
fLanguage
English
Publisher
ieee
Conference_Titel
Particle Accelerator Conference, 1997. Proceedings of the 1997
Conference_Location
Vancouver, BC
Print_ISBN
0-7803-4376-X
Type
conf
DOI
10.1109/PAC.1997.749688
Filename
749688
Link To Document