Title :
Impact of material properties and assembly geometry on bond-line stress when bonding PCBs to heat sinks with an isotropic conductive adhesive. Part II
Author_Institution :
Emerson & Cuming, Billerica, MA, USA
fDate :
31 May-3 June 2005
Abstract :
Engineers bonding substrates with dissimilar thermal coefficients of expansion with conductive adhesives are faced with several challenges. While attempting to minimize the throughput cost of assembly, engineers must manage the stress induced by high temperature processing and produce assemblies with high yield. In order to manage these tasks, engineers need to consider various adhesive properties to arrive at a solution that can be produced quickly and reliably. Typical properties that are considered include adhesion strength, cure schedule, electrical and thermal properties. Because miniaturization and higher frequency are continued trends in microwave electronics, new materials are required to meet the demands of these smaller, thinner, and hotter applications. This paper will evaluate the material properties necessary to minimize stress in packages with different geometries. Factors such as modulus, Tg, CTE, and thickness of an adhesive bond-line will be evaluated, and the relative importance of each material property will be determined by evaluating various developmental adhesives. Also, the geometry of the package will be considered from an L/D and substrate thickness perspective in an attempt to learn the importance of package geometry as it relates to stress levels. Lastly, the impact of process temperature will be considered to learn the ultimate impact on package stress.
Keywords :
adhesive bonding; adhesives; heat sinks; high-temperature electronics; materials properties; microassembling; microwave circuits; printed circuits; substrates; thermal analysis; thermal management (packaging); thermal stresses; CTE; PCB bonding; Tg; adhesion strength; assembly geometry; bond line stress; bond thickness; cure schedule; heat sink; high temperature processing; isotropic conductive adhesive; material properties; microwave electronics; miniaturization; modulus; package geometry; process temperature; stress management; substrate bonding; thermal expansion coefficient; Assembly; Bonding; Conductive adhesives; Engineering management; Geometry; Heat sinks; Material properties; Packaging; Reliability engineering; Thermal stresses;
Conference_Titel :
Electronic Components and Technology Conference, 2005. Proceedings. 55th
Print_ISBN :
0-7803-8907-7
DOI :
10.1109/ECTC.2005.1441978