An optical fiber based DAQ system for silicon microstrips detectors

Author

Civinini, C. ; D´Alessandro, R. ; Meschini, M.

Author_Institution

Florence Univ., Italy

Volume

2

fYear

1998

fDate

1998

Firstpage

941

Abstract

We describe a completely optically decoupled DAQ system, using a single optical fiber for feeding fast trigger and control signals to the front end electronics. Its main use is foreseen in the general environment of silicon microstrip detectors, with both single and double side readout. It has shown to be very helpful specially in case of double sided heavily irradiated silicon detectors where the bias operation voltage is around 500 V in order to reach full depletion and optimal signal to noise ratio

Keywords

data acquisition; nuclear electronics; optical fibre communication; readout electronics; silicon radiation detectors; Si; bias operation voltage; completely optically decoupled DAQ system; control signals; depletion; double sided heavily irradiated silicon detectors; fast trigger; front end electronics; optical fiber based DAQ system; optimal signal to noise ratio; silicon microstrips detectors; Control systems; Data acquisition; Delay; Detectors; Microstrip; Optical buffering; Optical fibers; Optical noise; Optical transmitters; Silicon;

fLanguage

English

Publisher

ieee

Conference_Titel

Nuclear Science Symposium, 1998. Conference Record. 1998 IEEE

Conference_Location

Toronto, Ont.

ISSN

1082-3654

Print_ISBN

0-7803-5021-9

Type

conf

DOI

10.1109/NSSMIC.1998.774323

Filename

774323