DocumentCode :
3409280
Title :
High efficiency battery discharge regulator with parallel power processing
Author :
Ejea, Juan B. ; Ferreres, A. ; Sanchis-Kilders, E. ; Maset, E. ; Esteve, F. ; Jordán, J.
Author_Institution :
Dpto. Ingenieria Electron., Valencia Univ.
Volume :
1
fYear :
2005
fDate :
6-10 March 2005
Firstpage :
204
Abstract :
In the following years power levels of 10 kW to 100 kW will be demanded by the telecommunication satellites. The reason for it is that the geostationary orbit required by this kind of satellites is becoming too crowded. It is not possible to keep 0.5 kW modules with more than 100 in parallel and therefore higher power modules must be used. A higher bus voltage seems also necessary and any voltage below 150 V and above 100 V could meet the needs. In this article, design guidelines and experimental results of a current doublet ZVS topology with parallel power processing to obtain a high efficiency battery discharger unit are given
Keywords :
aircraft power systems; artificial satellites; battery chargers; switching convertors; telecommunication power supplies; zero voltage switching; 0.5 kW; 10 to 100 kW; battery discharge regulator; bus voltage; current doublet ZVS topology; geostationary orbit; parallel power processing; telecommunication satellite; Artificial satellites; Batteries; Galvanizing; Load flow; Multichip modules; Power generation; Regulators; Switching frequency; Topology; Voltage;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Applied Power Electronics Conference and Exposition, 2005. APEC 2005. Twentieth Annual IEEE
Conference_Location :
Austin, TX
Print_ISBN :
0-7803-8975-1
Type :
conf
DOI :
10.1109/APEC.2005.1452919
Filename :
1452919
Link To Document :
بازگشت