Implementation of mobile information device profile on virtual lab

The rate at which information is produced in today\´s world is mind-boggling. The information is changing by every minute and today\´s corporate mantra is not "knowledge is power" but "timely knowledge is power". Millions of dollars are won or lost due to information or lack of it. Business executives and corporate managers push their technology managers to provide information at the right time in the right form. They want information on the go and want to be connected all the time to the Internet or their corporate network. The rapid advancement of technology in the field of miniaturization and that of communications has introduced a lot of roaming devices for people to connect through to the network like laptop, PDA, mobile telephones and many embedded devices. Programming for these devices was cumbersome and limited since each device supported its own standard I/O ports, screen resolution and had specific configurations. The introduction of Java 2 Micro Edition (J2ME) has solved this problem to some extent. J2ME is divided into configuration and profiles, which provide specific information to a group of related devices. Mobile telephones can be programmed using J2ME. With the mobility offered by the cellular telephones combined with electrical engineering many new uses can be found out for existing electrical machines. It will also enable remote monitoring of electrical machines and the various parameters involved in electrical engineering.