DocumentCode
345249
Title
Design of an on-axis coupled planar MM-wave structure
Author
Apel, R. ; Henke, H.
Author_Institution
Tech. Univ. Berlin, Germany
Volume
2
fYear
1999
fDate
1999
Firstpage
812
Abstract
The paper presents the design of an on-axis coupled structure which is planar double-sided and suited for fabrication with deep X-ray lithography. It is a standing wave structure with an operating frequency of 91.392 GHz and is designed for the π-mode. End cells and input power coupler are matched numerically by means of the code GdfidL. The main RF parameters are also determined numerically. Reflection and bead pull measurements with a scaled-up model at 10 GHz are presented
Keywords
X-ray lithography; accelerator RF systems; accelerator cavities; millimetre wave couplers; planar waveguides; 10 GHz; 91.392 GHz; GdfidL code; RF parameters; accelerating structure; bead pull measurements; deep X-ray lithography; end cells; input power coupler; on-axis coupled planar MM-wave structure; pi-mode; planar double-sided structure; reflection measurements; scaled-up model; standing wave structure; Acceleration; Attenuation; Bandwidth; Impedance; Periodic structures; Radio frequency; Rough surfaces; Surface roughness; Tin; X-ray lithography;
fLanguage
English
Publisher
ieee
Conference_Titel
Particle Accelerator Conference, 1999. Proceedings of the 1999
Conference_Location
New York, NY
Print_ISBN
0-7803-5573-3
Type
conf
DOI
10.1109/PAC.1999.795364
Filename
795364
Link To Document