DocumentCode :
34621
Title :
Paper Machine Dryer Section Tuning: A Novel Solution to Prevent System Instability
Author :
Honaker, Darren ; Jones, Walter V.
Author_Institution :
TMEIC Corp., Salem, VA, USA
Volume :
20
Issue :
2
fYear :
2014
fDate :
March-April 2014
Firstpage :
63
Lastpage :
68
Abstract :
Paper machine dryer sect ions create challenges in tuning due to gear backlash. This problem is amplified when older paper machines are upgraded with newer, higher-performance drive systems. The newer drive systems can achieve a much higher degree of control, which can fatigue the mechanical drivetrain. Most often, backlash is experienced during the speed regulator tune-up [1]. The speed regulator response is modified in an effort to improve stability while in backlash. However, there are other tune-up considerations that must be considered. A dryer section can be pulled from a downstream section, which can cause its applied torque to be near zero, resulting in speed instability. This article investigates the cause of this instability and presents a novel solution for preventing it.
Keywords :
gears; mechanical stability; paper making machines; power transmission (mechanical); applied torque; downstream section; gear backlash; higher-performance drive systems; mechanical drivetrain; older paper machines; paper machine dryer section tuning; speed instability; speed regulator response; speed regulator tune-up; system instability; Oscillators; Paper machine dryers; Regulators; Shafts; Stability analysis; Torque control;
fLanguage :
English
Journal_Title :
Industry Applications Magazine, IEEE
Publisher :
ieee
ISSN :
1077-2618
Type :
jour
DOI :
10.1109/MIAS.2013.2288392
Filename :
6690132
Link To Document :
بازگشت