Title :
Satellite attitude control—A direct parametric approach
Author_Institution :
Center for Control Theor. & Guidance Technol., Harbin Inst. of Technol., Harbin, China
Abstract :
In this paper, the dynamical model in a matrix second-order nonlinear form with respect to the three Euler angles is firstly established for the attitude system of a satellite, which is complete in the sense that no approximation is taken. Then, with the help of a recently proposed general parametric design approach for general fully-actuated second-order nonlinear systems, a direct parametric approach for satellite attitude control via proportional plus derivative feedback is proposed, which gives a complete parametrization of the pair of feedback gains, and allows usage of the established complete nonlinear model in matrix second-order format. The approach possesses two important features. Firstly, with the proposed controller parametrization, the satellite attitude system, though highly nonlinear, can be turned into a constant linear system with desire eigenstructure. Secondly, in such a design there are still degrees of freedom which may be further utilized to improve the system performance. An example is considered to demonstrate the use of the proposed approach.
Keywords :
artificial satellites; attitude control; eigenstructure assignment; feedback; nonlinear control systems; proportional control; constant linear system; direct parametric approach; dynamical model; eigenstructure; feedback gains; general fully-actuated second-order nonlinear systems; general parametric design approach; matrix second-order format; matrix second-order nonlinear form; nonlinear model; proportional plus derivative feedback; satellite attitude control; satellite attitude system; three Euler angles; Attitude control; Closed loop systems; Equations; Mathematical model; Nonlinear systems; Satellites; Vectors; Attitude control; Direct parametric approach; Fully-actuated second-order systems; Nonlinear systems; Satellites;
Conference_Titel :
Intelligent Control and Automation (WCICA), 2014 11th World Congress on
DOI :
10.1109/WCICA.2014.7053383