DocumentCode
3584246
Title
Spear 3 injection kicker
Author
Sebek, J. ; Arnett, D. ; Langton, J. ; Pappas, C.
Author_Institution
Stanford Linear Accelerator Center, CA, USA
Volume
2
fYear
2001
fDate
6/23/1905 12:00:00 AM
Firstpage
1592
Abstract
The design of the SPEAR 3 injection kicker system is presented. This system will include three kicker magnets and their associated pulsers. The magnet design is based on the DELTA kicker magnets, which present a low RF impedance to the beam, and are relatively straightforward to construct. The pulsers use cascaded IGBT stages that are based on the modulator pulsers developed by a SLAC/LLNL collaboration for the NLC. Design considerations and the results of prototype tests will be discussed
Keywords
accelerator magnets; electromagnets; electron accelerators; electron beams; particle beam dynamics; storage rings; DELTA kicker magnets; LLNL; SLAC; Spear 3 injection kicker; cascaded IGBT stages; injection line; kicker magnets; low radiofrequency impedance; magnet design; modulator pulsers; prototype tests; residual kicker oscillations; storage ring; Ceramics; Impedance; Insulated gate bipolar transistors; Linear accelerators; Pulse modulation; Radio frequency; Resonance; Storage rings; Stripline; Structural beams;
fLanguage
English
Publisher
ieee
Conference_Titel
Particle Accelerator Conference, 2001. PAC 2001. Proceedings of the 2001
Print_ISBN
0-7803-7191-7
Type
conf
DOI
10.1109/PAC.2001.986758
Filename
986758
Link To Document