A 802.15.3c/802.11ad compliant 24 Gb/s FFT processor for 60 GHz communication systems

This paper, we present a 24 Gb/s 512-point 8X-parallel FFT processor for 60 GHz communication systems. The proposed design is a pipelined Multipath Delay Feedback (MDF) radix-23 architecture, which exploits the parallelism of the multipath scheme together with pipeline technique to achieve a high throughput rate. Besides, the proposed FFT processor is implemented with an area efficient optimized multiplier architecture that avoid the need to store the twiddle factor in memory and a dynamic scaling technique to enhance the SQNR, allowing the FFT to operate with 16-QAM and 64-QAM for single carrier (SC) and orthogonal frequency-division multiplexing(OFDM) schemes. This FFT processor has been implemented in a SC/OFDM dual-mode baseband receiver satisfying the requirements of the 802.15.3c/802.11ad standard with a 40nm CMOS process. The post-layout implementation results show that the proposed FFT processor is able to achieve up to 24 Gb/s throughput rate at 500MHz clock with a power consumption of 87mW and area of 0.64mm².