DocumentCode
627147
Title
A new single-stage AC-DC converter for medical implant devices
Author
Yen-Chia Chu ; Artan, N.S. ; Czarkowski, Dariusz ; Chao, H. Jonathan
Author_Institution
Dept. of Electr. & Comput. Eng., New York Univ., New York, NY, USA
fYear
2013
fDate
19-23 May 2013
Firstpage
2948
Lastpage
2951
Abstract
A single-stage buck-type AC-DC converter is proposed for medical implants to achieve high efficiency. The proposed structure combines two traditional stages of the three-stage power path for medical implants and eliminates a MOSFET and a filter capacitor to improve the efficiency. The proposed circuit converts 40 Vpp coil voltage into a DC output voltage of 4.2 V. The stability analysis of the circuit is also presented. Load currents between 1 mA to 100 mA are supported. The efficiency of the proposed circuit is 81.9%.
Keywords
AC-DC power convertors; circuit stability; prosthetic power supplies; MOSFET; current 1 mA to 100 mA; efficiency 81.9 percent; filter capacitor; medical implant device; single-stage buck-type AC-DC converter; stability analysis; voltage 4.2 V; voltage 40 V; AC-DC power converters; Batteries; Implants; Rectifiers; Regulators; Voltage control;
fLanguage
English
Publisher
ieee
Conference_Titel
Circuits and Systems (ISCAS), 2013 IEEE International Symposium on
Conference_Location
Beijing
ISSN
0271-4302
Print_ISBN
978-1-4673-5760-9
Type
conf
DOI
10.1109/ISCAS.2013.6572497
Filename
6572497
Link To Document