DocumentCode :
629453
Title :
Design of E slot rectangular microstrip slot antenna for WiMAX application
Author :
Chitra, R.J. ; Jeyanthi, K. ; Nagarajan, Vijay
Author_Institution :
Dept. of Electron. & Commun., Adhiparasakthi Eng. Coll., Melmaruvathur, India
fYear :
2013
fDate :
3-5 April 2013
Firstpage :
1048
Lastpage :
1052
Abstract :
In this paper, a new design technique of microstrip patch antenna with E-slot and a-slot at the edge of the radiator for Worldwide Interoperability for Microwave Access (WiMAX) application is presented. The proposed microstrip patch antenna adopts the partial ground planes and Rogers Duroid 5880 substrate is used which is having low dielectric constant, thereby provides good bandwidth. Microstrip feedline technique is used to feed the antenna with 50Ω impedance. The proposed antenna has a compact size of 34 × 27 × 0.787 mm2 and with return loss of -18.6 dB at the lower and middle frequency range of WiMAX application. Using Ansoft HFSS the simulated results are nresented and evaluated with and without slit.
Keywords :
WiMax; microstrip antennas; permittivity; slot antennas; Ansoft HFSS; E slot rectangular microstrip slot antenna design; Rogers Duroid 5880 substrate; WiMax application; dielectric constant; loss -18.6 dB; microstrip feedline technique; microwave access application; partial ground planes; resistance 50 ohm; worldwide interoperability; Microstrip; Microstrip antennas; Patch antennas; Slot antennas; WiMAX; Wireless LAN; E-slot; WiMAX;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Communications and Signal Processing (ICCSP), 2013 International Conference on
Conference_Location :
Melmaruvathur
Print_ISBN :
978-1-4673-4865-2
Type :
conf
DOI :
10.1109/iccsp.2013.6577216
Filename :
6577216
Link To Document :
بازگشت