DocumentCode
636158
Title
Prediction on tensile properties of cow dung powder filled glass- polyester hybrid composites
Author
Reddy, T. Ranjeth Kumar ; Rao, T. Subba ; Suvarna, R. Padma ; Kumar, M. Ajay
Author_Institution
Dept. of Phys., SRIT Eng. Coll., Anantapur, India
fYear
2013
fDate
24-26 July 2013
Firstpage
702
Lastpage
705
Abstract
In this paper the tensile strength and modulus of cow dung powder filled glass- polyester hybrid composites were studied. Two different hybrid composites such as treated and untreated cow dung fibers were fabricated and effect of alkali treatment of the cow dung fibers on these properties were studied. It was observed that, tensile strength and modulus of the hybrid composites increases with increase of cow dung percentage of weight. These properties found to be higher when alkali treated cow dung fibers were used in the hybrid composites. The eradication of amorphous hemi-cellulose with alkali treatment leading to higher crystalline of the cow dung fibers with alkali treatment might responsible for these observations. The effect of alkali treatment on the bonding between glass / cow dung composites was also studied. Scanning electron microscope (SEM) was also conducted on the cross sections of fractured surfaces.
Keywords
amorphous state; etching; fracture; glass fibre reinforced plastics; scanning electron microscopy; tensile strength; SEM; alkali treatment; amorphous hemicellulose; cow dung powder filled glass-polyester hybrid composites; cow dung weight percentage; fractured surfaces; scanning electron microscopy; tensile modulus; tensile properties; tensile strength; untreated cow dung fibers; Bonding; Polymers; Cow dung; Glass fiber; Hybrid composites; Tensile modulus; Tensile strength;
fLanguage
English
Publisher
ieee
Conference_Titel
Advanced Nanomaterials and Emerging Engineering Technologies (ICANMEET), 2013 International Conference on
Conference_Location
Chennai
Print_ISBN
978-1-4799-1377-0
Type
conf
DOI
10.1109/ICANMEET.2013.6609394
Filename
6609394
Link To Document