• DocumentCode
    734869
  • Title

    A circularly polarized stacked patch antenna array for tracking applications in S-band

  • Author

    Saad Khan, M. ; Tahir, Farooq A.

  • Author_Institution
    Sch. of Electr. Eng. & Comput. Sci., Nat. Univ. of Sci. & Technol., Islamabad, Pakistan
  • fYear
    2015
  • fDate
    13-17 April 2015
  • Firstpage
    1
  • Lastpage
    4
  • Abstract
    Design of a high gain and broadband circularly polarized array antenna using air cushion and stacked patch technique is presented in this paper. Basic radiating element of the proposed array consists of a driven patch and parasitic patch supported over an air cushion. Driven patch is fed through a microstrip line whereas the parasitic patch is electromagnetically coupled to the lower patch. Using this antenna element, a probefed 2×2 array antenna has been designed and tested. VSWR of the array antenna is less than 2 from 2.02 to 2.38 GHz. Axial ratio is less than 3dB from 2.15 to 2.40 GHz with peak gain of 17 dBi.
  • Keywords
    UHF antennas; antenna feeds; antenna radiation patterns; antenna testing; electromagnetic coupling; electromagnetic wave polarisation; microstrip antenna arrays; microstrip components; microstrip lines; tracking; S-band; air cushion; antenna element testing; array radiating element; broadband circularly polarized stacked patch antenna array design; driven patch; electromagnetic coupling; frequency 2.02 GHz to 2.40 GHz; gain 17 dB; microstrip line; parasitic patch; patch feeding; tracking applications; Antenna arrays; Antenna measurements; Arrays; Broadband antennas; Gain; Polarization; axial ratio; circular polarization; microstrip antenna; parasitic coupling; stacked patch; truncated edge;
  • fLanguage
    English
  • Publisher
    ieee
  • Conference_Titel
    Antennas and Propagation (EuCAP), 2015 9th European Conference on
  • Conference_Location
    Lisbon
  • Type

    conf

  • Filename
    7228907