Online Reference Limitation Method of Shunt-Connected Converters to the Grid to Avoid Exceeding Voltage and Current Limits Under Unbalanced Operation—Part II: Validation

This paper is the continuation of Part I in which an online reference limitation strategy for shunt-connected converters is presented. This limitation strategy is successfully validated in this Part II of the paper by means of experimental results obtained in a laboratory setup. Two different experiment sets are carried out in order to check the two application scenarios described in Part I. On the one hand, the limitation strategy is implemented in the STATCOM application reducing the reactive power reference. On the other hand, the grid balancer functionality is implemented together with the new limitation strategy reducing the current references. In this last scenario, two different experiments are shown: 1) a switching-on of the converter; and 2) a voltage variation at the point of common coupling. In both functionalities, the corresponding reference limitations are activated due to overcurrent and overvoltage cases and the limitation due to the dc bus voltage oscillations is validated in the grid balancer functionality.