DocumentCode
744908
Title
A Per-Channel A/D Converter Having 15-Segment µ-255 Companding
Author
Candy, James C. ; Ninke, William H. ; Wooley, Bruce A.
Author_Institution
Bell Laboratories, Holmdel, N.J., USA
Volume
24
Issue
1
fYear
1976
fDate
1/1/1976 12:00:00 AM
Firstpage
33
Lastpage
42
Abstract
This paper describes a companded analog-to-digital (A/D) converter for voiceband signals that is simple and potentially inexpensive. The converter uses only 18 coarsely spaced analog levels. Fine resolution is obtained by oscillating between these levels at an increased speed and averaging the result over a Nyquist interval. The companding used in the converter is effectively the same as that of μ-255 pulse-code modulation (PCM). In the encoding process a one-bit code is generated at 256 000 samples/s. This 1-bit per sample signal can be transmitted and decoded directly, or a simple digital circuit will produce a 13-bit, 8-kHz linear PCM signal that can be compressed to 8-bit companded PCM format. In this paper the basic operation of the 1-bit coder is described and its performance when connected to a 1-bit decoder is illustrated. Methods for obtaining both linear and compressed PCM are then presented, and the properties of these PCM signals with respect to noise, gain tracking, and harmonic content are described. Relative insensitivity to circuit component variations, absence of analog gates, along with the need to generate only a few analog levels, make the coder especially well suited to integrated circuit realization.
Keywords
A/D converters; ADC; Analog-to-digital conversion (ADC); Companding; PCM communication; Analog integrated circuits; Analog-digital conversion; Decoding; Digital circuits; Encoding; Integrated circuit noise; Phase change materials; Pulse modulation; Pulse width modulation converters; Signal resolution;
fLanguage
English
Journal_Title
Communications, IEEE Transactions on
Publisher
ieee
ISSN
0090-6778
Type
jour
DOI
10.1109/TCOM.1976.1093180
Filename
1093180
Link To Document