DocumentCode
763449
Title
Modification of the nozzle flow using injected DC current
Author
Kadar, Laszlo I. ; Biringer, Paul P. ; Lavers, J. Douglas
Author_Institution
Dept. of Electr. & Comput. Eng., Toronto Univ., Ont., Canada
Volume
31
Issue
3
fYear
1995
fDate
5/1/1995 12:00:00 AM
Firstpage
2080
Lastpage
2083
Abstract
The clogging of the tundish nozzle during the continuous casting of steel presents a severe problem. The clogging is caused by the separation of the flow in the nozzle. This paper investigates the use of electrical currents through the nozzle to control the separation zone
Keywords
casting; electromagnetic forces; flow separation; flow simulation; nozzles; clogged nozzle; continuous steel casting; electrical currents; flow separation; injected DC current; nozzle flow; separation zone control; tundish nozzle; Aerodynamics; Aluminum; Boundary conditions; Casting; Electromagnetic forces; Equations; Fluid flow; Mathematical model; Steel; Viscosity;
fLanguage
English
Journal_Title
Magnetics, IEEE Transactions on
Publisher
ieee
ISSN
0018-9464
Type
jour
DOI
10.1109/20.376454
Filename
376454
Link To Document