Title :
Analysis and design of a novel noncontacting waveguide backshort
Author :
Weller, Thomas M. ; Katehi, Linda P B ; McGrath, William R.
Author_Institution :
Dept. of Electr. Eng. & Comput. Sci., Michigan Univ., Ann Arbor, MI, USA
fDate :
5/1/1995 12:00:00 AM
Abstract :
A new noncontacting waveguide backshort has recently been developed for millimeter- and submillimeter-wave frequencies. The design consists of a metal bar with rectangular holes cut into it, which is covered with a dielectric layer to form a snug fit with the broadwalls of a waveguide. It is mechanically rugged and can be readily fabricated for frequencies from 1-1000 GHz. This paper presents a technique for the theoretical characterization of the backshort, using an approach that combines the mode-matching method and a set of coupled space-domain integral equations. The convergence characteristics of the analysis are included, along with a set of general design guidelines
Keywords :
dielectric-loaded waveguides; integral equations; mode matching; waveguide components; 1 to 1000 GHz; convergence characteristics; coupled space-domain integral equations; design guidelines; dielectric layer; millimeter-wave frequencies; mode-matching method; noncontacting waveguide backshort; submillimeter-wave frequencies; Circuits; Dielectrics; Guidelines; Impedance; Integral equations; Laboratories; Radio frequency; Rectangular waveguides; Senior members; Space technology;
Journal_Title :
Microwave Theory and Techniques, IEEE Transactions on
