Staggered SAR: High-Resolution Wide-Swath Imaging by Continuous PRI Variation

Synthetic aperture radar (SAR) is a remote sensing technique, capable of providing high-resolution images independent of weather conditions and sunlight illumination. This makes SAR very attractive for the systematic observation of dynamic processes on the Earth´s surface. However, conventional SAR systems are limited in that a wide swath can only be achieved at the expense of a degraded azimuth resolution. This limitation can be overcome by using systems with multiple receive apertures, displaced in along track, but a very long antenna is required to map a wide swath. If a relatively short antenna with a single aperture in along track is available, it is still possible to map a wide area: Multiple swaths can be, in fact, simultaneously imaged using digital beamforming in elevation, but “blind ranges” are present between adjacent swaths. This paper considers an innovative concept, staggered SAR, where the pulse repetition interval (PRI) is continuously varied. This concept allows the imaging of a wide continuous swath without the need for a long antenna with multiple apertures. The choice of the sequence of PRIs and the preprocessing of the raw data are discussed in detail, showing how the staggered SAR is even less affected by ambiguities of pointlike or extended targets with respect to a system with constant PRI, which simultaneously maps multiple swaths. Some system design examples are finally presented and compared.