DocumentCode :
829094
Title :
Extraction from the CERN SPS
Author :
Baconnier, Y. ; Faugeras, P. ; Kissler, K.H. ; de Raad, B. ; Scandale, W.
Author_Institution :
CERN - Geneva, Switzerland
Volume :
24
Issue :
3
fYear :
1977
fDate :
6/1/1977 12:00:00 AM
Firstpage :
1434
Lastpage :
1436
Abstract :
The experimental programme requires three different modes of extraction from the SPS : fast extraction (burst duration from 3 ??s to 23 ??s), slow resonant extraction (spill duration 0.5 s to 2 s) and fast resonant extraction (spill duration shorter than 3 ms). All three modes have been successfully tested and brought into operation. Fast extraction of the full beam is 100% efficient. By fast beam shaving, fractions as low as 1% of the circulating beam can be extracted in a fairly stable way. Third-integer extraction is used to produce slow spills of 700 ms or more. The efficiency of resonant extraction is currently some 97%. The spill duty factor at present amounts to about 40%. Fast resonant spills of less than 2 ms were achieved with both integer and half-integer extraction. The different modes of extraction are consecutively performed during each accelerator cycle. At present, a 1 s third-integer spill at 200 GeV/c is followed by a fast shaving extraction at 210 GeV/c and by a fast or fast resonant extraction of the remaining protons at 400 GeV/c.
Keywords :
Apertures; Cathodes; Electrostatic measurements; Extraterrestrial measurements; Instruments; Particle beams; Proton accelerators; Resonance; Testing; Wires;
fLanguage :
English
Journal_Title :
Nuclear Science, IEEE Transactions on
Publisher :
ieee
ISSN :
0018-9499
Type :
jour
DOI :
10.1109/TNS.1977.4328969
Filename :
4328969
Link To Document :
بازگشت