• DocumentCode
    830153
  • Title

    The VICKSI Beam Line Instrumentation and Control System

  • Author

    Egelhaaf, C. ; Erdmann, D. ; Homeyer, H. ; Zeitz, W.-D.

  • Author_Institution
    Hahn-Meitner-Institut fÿr Kernforschung Berlin GmbH Bereich Kern- und Strahlenphysik Berlin-West, Germany
  • Volume
    24
  • Issue
    3
  • fYear
    1977
  • fDate
    6/1/1977 12:00:00 AM
  • Firstpage
    1745
  • Lastpage
    1747
  • Abstract
    The VICKSI1 beam line instrumentation and control system is based upon a combination of two main features: i) a computer controlled multiplex system for switching of analog signals from different beam probes to analog instruments (displays, meters) in the control room for fast tuning and direct control by the operator, ii) signals going directly into the analog CAMAC bus with digital or display readout after computer processing with necessarily longer response times for careful analysis and control of long term stability. First operating experience with beam in the injection line has shown that the system allows fast beam observation and handling.
  • Keywords
    Analog computers; CAMAC; Computer displays; Control system analysis; Control systems; Delay; Instruments; Probes; Signal analysis; Signal processing;
  • fLanguage
    English
  • Journal_Title
    Nuclear Science, IEEE Transactions on
  • Publisher
    ieee
  • ISSN
    0018-9499
  • Type

    jour

  • DOI
    10.1109/TNS.1977.4329072
  • Filename
    4329072
    • Link To Document
    https://search.isc.ac/dl/search/defaultta.aspx?DTC=49&DC=830153