Surface and pseudo surface acoustic waves in langatate: predictions and measurements

Langatate (LGT, La/sub 3/Ga/sub 5.5/Ta/sub 0.5/O/sub 14/) is a recent addition to materials of the trigonal crystal class 32. In this paper SAW contour plots of the phase velocity (v/sub p/), the electromechanical coupling coefficient (K/sup 2/), the temperature coefficient of delay (TCD), and the power flow angle (PFA), are given showing the orientations in space in which high coupling is obtained, with the corresponding TCD, PFA, and vp characteristics for these orientations. This work reports experimental results on the SAW temperature fractional frequency variation (/spl Delta/f/fo) and the TCD for several LGT orientations on the plane with Euler angles: (0/spl deg/, 132/spl deg/, /spl psi/). The temperature behavior has been measured directly on SAW wafers from 10 to 200/spl deg/C, and the results are compared with numerical predictions using our recently measured temperature coefficients for LGT material constants. This research also has uncovered temperature compensated orientations, which we have experimentally verified with parabolic behavior, turnover temperatures in the 130 to 160/spl deg/C range, and /spl Delta/f/fo within 1000 ppm variation from 10 to 260/spl deg/C, appropriate for higher temperature device applications. Regarding the pseudo surface acoustic waves (PSAWs), results of calculations are presented for both the PSAW and the high velocity PSAW (HVPSAW) for some selected, rotated cuts. This study shows that propagation losses for the PSAWs of about 0.01 dB/wavelength, and phase velocities approximately 20% higher than that of the SAW, exist along specific orientations for the PSAW, thus showing the potential for somewhat higher frequency SAW device applications on this material, if required.