Representative static load models for transient stability analysis: development and examination

Load representation has a significant impact on power system analysis and control results. Currently, static load models are still popular in power industry for transient stability analysis. Dynamic load models are recommended in both industry and academia for possible improvement in analysis accuracy. The accuracy of using static (nonlinear) load models with suitably identified parameters for transient stability analysis is examined. Numerical studies conducted using on-line measurement data indicate that static load models, as compared with induction motor load models, are acceptable for modelling real power behaviours during disturbances and hence are adequate for transient stability analysis. Using multiple sets of on-line measurements, representative model parameters of five static nonlinear load models are derived and their performance in modelling dynamic behaviours of both real and reactive powers is compared. A method is presented to determine a representative set of parameters of static (nonlinear) load models for each loading condition